Since our establishment in 2002, we have amassed invaluable expertise in Foam Core Lightweight Moulding technology. Leveraging this extensive experience, we are uniquely positioned to deliver exceptional solutions tailored to your needs.
Installation process is as simple as cut-and-paste, thus significantly reduces the requirement of skill and labour at site, as a result, error during construction is greatly reduced. The overall result is time and money saving, while maintaining superior finishing quality.
 |  |
| Measure and cut Masfoam to required length. | |
 |  |
| Clean wall from surface contamination. Snap chalk line on the wall to use as a guide for the bottom of Masfoam. Put a few masonry nails above the line, at 300~600mm interval. | |
 |  |
| Mix Masbond cement adhesive with water. Apply mixture onto the back of Masfoam. | |
 |  |
| Fix Masfoam along the chalk line. Ensure that some of the mixutre is squeezed out of the edges. Remove excess mixture from the edges with putty knife. Remove smear with moistened cloth or brush. | |
| Joints and Termination | |
 | |
| Mitter joints | |
 |  |
| Terminations | |
- [back to top ]-
Masbond is specially formulated polymer-modified mortar for External Thermal Insulation Composite (E.I.F.S)
| Masbond MB520 |
 |
| Add Masbond MB520 to clean water in a container, to the ratio of 4 : 1 by weight (kg). Stir the mixture until it is homogenous and lump-free. |
 |
| Leave the mixture for 5 minutes. Stir the mixture again. |
| Working Time |
| Use within 30 minutes. Full strength is expected after 28 days of curing. |
| Shelf life & Storage |
| 6 months in its original packing. Store in dry place. |
- [back to top ]-
Our Foam Core Lightweight Moulding can be maintained like common cementitious surface.
1. Its surface should be painted and maintained with emulsion paint.
2. Under-coat with water based sealer for best result.
3. Damages and cracks can be patched or filled with Masbond mixture.
4. Minor cracks can be corrected by water based sealer or modified silicon filler
- [back to top ]-